Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Light Switch Controls

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Steering wheel

Video tutorial

Before proceeding with the removal of the steering wheel, disconnect the battery to avoid the activation of warning lights. Locate the holes behind the spokes of the steering wheel to release the airbag retaining springs; then disconnect the connectors and remove it. Unscrew the steering wheel fixing bolt and remove the wheel with the wheels straight; unscrew the screws securing the covers of the light switch controls to remove them; then unscrew the bolt of the light switch retaining clamp and slide it off the column, disconnecting the associated connectors.

Disconnect the radio controls and attach them to the new light switch, proceeding in reverse for reassembly.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Repairing the Light Switch of the Peugeot 206
Repairing the Light Switch of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the light switch, proceed as follows: use a flathead screwdriver to remove the onboard computer control located at the end of the light sw…
How to Activate the Fog Lights of a Peugeot 206
How to Activate the Fog Lights of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before starting, sit in the driver's seat of your Peugeot 206. Insert the key into the ignition switch to activate the instrument panel. Next, turn t…
Peugeot 206 Fuse Diagram
Peugeot 206 Fuse Diagram
Peugeot 206 (1998-2012 / MK 1) The fuse boxes of this vehicle are located, the first in the cabin under the steering column and the second in the engine compartment next to the bat…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos