Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light on the Peugeot 206

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

Open the boot lid and remove the cover next to the affected rear light, then unscrew the two exposed bolts that secure the light itself. At this point, you can already pull the light from its housing and disconnect its connector.

Once done, you can remove the internal housing of the light as shown in the video, and at this stage, you can easily replace a burnt bulb or install a new light simply by reversing the procedure. As you can see, this is a very simple operation and within reach of everyone, even less experienced mechanics.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to disassemble the rear headlight of the Peugeot 3008 and 5008
How to disassemble the rear headlight of the Peugeot 3008 and 5008
Peugeot 3008 (2009-2016 / MK 1, T84) The right rear light of the Peugeot 3008 can be removed from its housing following the same procedure used for removing the rear light of the Peugeot…
How to Remove the Rear Light of a Peugeot 3008
How to Remove the Rear Light of a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Before you begin, open the tailgate of your Peugeot 3008. Start by prising off and removing the cover for the rear light fixing screws using a thin b…
How to Remove the Rear Light of a Peugeot 3008?
How to Remove the Rear Light of a Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) Before you begin, open the tailgate of your Peugeot 3008. Start by prising off and removing the cover of the rear light fixing screws, using a thin b…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos