Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Peugeot 3008?

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Light bulb

To replace the rear light bulb on the Peugeot 3008, open the boot lid and loosen the two bolts located directly next to the seal. Once the bolts are loosened, you can pull the light unit from its housing after disconnecting the connectors. By releasing the clips on the bulb holder, you can remove the bulbs and replace them with new spare parts. After replacement, the holder must be reinserted into the light unit, connected to the connector, and secured back into its housing with the bolts.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear headlight of the Peugeot 3008 and 5008
How to disassemble the rear headlight of the Peugeot 3008 and 5008
Peugeot 3008 (2009-2016 / T84, MK 1) The right rear light of the Peugeot 3008 can be removed from its housing following the same procedure used for removing the rear light of the Peugeot…
How to Replace the Rear Headlamp Bulbs on a Peugeot 3008
How to Replace the Rear Headlamp Bulbs on a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) How to replace the rear headlamp bulbs on a Peugeot 3008? Follow these steps: open the boot and use a screwdriver to unscrew the securing screws loca…
Replace the Rear Light Bulbs on Peugeot 3008
Replace the Rear Light Bulbs on Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Want to replace the rear light bulbs on a Peugeot 3008 but don't know how? Here's how: open the tailgate and using a screwdriver, unscrew (with a soc…

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos