Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on a Peugeot 106

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Side mirror

To replace the external wing mirror on a Peugeot 106, first remove the inner door panel. Start by loosening the screws located at the bottom of the panel, then those around the speaker to remove the glove compartment. Next, loosen the screws beneath the internal handle so that it can be removed, allowing you to take off the panel. Once the panel is removed, you can take off the triangular inner cover corresponding to the mirror by loosening the screws that will allow you to remove and replace the mirror.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Wing Mirror on Peugeot 106
Replacing the Wing Mirror on Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Simply pull the plastic next to the window at the height of the wing mirror by hand. Once done, unscrew the inner screw and completely remove this pl…
Where is the OBD2 port located in the Peugeot 106?
Where is the OBD2 port located in the Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) If you own a Peugeot 106 and want to easily find the OBD2 port in the car, all you have to do is follow the steps described in the following guide. F…
How to Change Fuel Filter on Peugeot 106
How to Change Fuel Filter on Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Learn how to change the fuel filter on a Peugeot 106. Lift the car with a jack, then locate the position of the fuel filter. Disconnect the wires and…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos