Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cylinder Head Gasket on the Peugeot 106?

Model: Peugeot 106 MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Checks and maintenance

Video tutorial

To replace the cylinder head gasket on the Peugeot 106, open the bonnet to access the engine bay. Next, loosen the bolts securing the upper part of the engine and disconnect the connectors to access the components inside. Once you reach the cylinders, you can remove the old gasket and replace it with a new spare part.

After the new gasket is installed, reassemble all previously removed components by inserting the bolts and reconnecting the connectors.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Oil Change on a Peugeot 106
Oil Change on a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Change the old oil on a Peugeot 106, including the filter. Lift the car on a column lift and unscrew the bolt from the oil sump, allowing the oil to …
What is the Fuse Diagram and Where is the Fuse Box on a Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) This article includes a video that describes the exact diagram and positioning of the fuses in your Peugeot 106. Fuses are designed to prevent damage…
Location and Diagram of the Fuse Boxes on a Peugeot 106
Location and Diagram of the Fuse Boxes on a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) In this video, we will see where the fuse boxes are located on the Peugeot 106 and their contents according to the diagram shown in the video. The Pe…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos