Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change on a Peugeot 106

Model: Peugeot 106 MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Engine oil

Video tutorial

Change the old oil on a Peugeot 106, including the filter. Lift the car on a column lift and unscrew the bolt from the oil sump, allowing the oil to drain into a plastic container (tighten the bolt after draining).

Using a strap wrench, unscrew the oil filter (as shown in the video), remove it, and fit a new one, ensuring it adheres well around the thread. Lower the car, open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the front bonnet, securing it. Remove the cap on the engine head and top up the engine with new oil.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

Where is the OBD2 port located in the Peugeot 106?
Where is the OBD2 port located in the Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) If you own a Peugeot 106 and want to easily find the OBD2 port in the car, all you have to do is follow the steps described in the following guide. F…
What is the Fuse Diagram and Where is the Fuse Box on a Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) This article includes a video that describes the exact diagram and positioning of the fuses in your Peugeot 106. Fuses are designed to prevent damage…
Replacing the Fuel Pump on a Peugeot 106
Replacing the Fuel Pump on a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Follow this guide to remove and replace the fuel pump on a Peugeot 106. First, open the boot and start reclining the rear seats; then lift the rear b…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos