Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disassemble the Centre Dashboard on a Peugeot 106

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Dashboard

This video demonstrates how to disassemble the centre part of the dashboard on a Peugeot 106, following the instructions below. First, get inside the vehicle and start by removing the original radio; use the appropriate tools and lever it from the sides to remove it. Next, take off the heating knob and unscrew the fixing screw located underneath; then extract the climate control switches by disconnecting the electrical cable at the back. Now, unscrew all the fixing screws of the dashboard, following the video to the end for complete disassembly!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the standard car radio of the Peugeot 106
How to disassemble the standard car radio of the Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Today's information will allow us to disassemble and replace the standard radio of the Peugeot 106. First, we get into the car and start inserting th…
How to start a Peugeot 106?
How to start a Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) To start a Peugeot 106, follow these steps. Make sure the car is in neutral and the handbrake is pulled. Insert the key into the ignition and turn th…
Disassembly of the side glass of the Peugeot 106
Disassembly of the side glass of the Peugeot 106
Peugeot 106 (1991-2004 / MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the side glass of the front door of the Peugeot 106. First o…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos