Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Peugeot 106 MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Oil filter

Video tutorial

When changing the engine oil, it is advisable to also replace the filter due to the low cost and ease of installation. After draining the used oil through the drain plug on the sump, locate the oil filter cartridge directly above the sump, near the drain pipe.

Use a metal band type spanner to unscrew the old filter (some oil may spill out). Apply clean oil to the gasket of the new filter and screw it in without exceeding the torque specification. Finally, fill the engine with new oil until the correct level is reached.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Instructions for Replacing Engine Oil
Instructions for Replacing Engine Oil
Peugeot 106 (1991-2004 / MK 1) To replace the engine oil, place the vehicle on suitable car ramps, position a container of appropriate capacity under the oil sump, aligned with the…
Oil Change on a Peugeot 106
Oil Change on a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Change the old oil on a Peugeot 106, including the filter. Lift the car on a column lift and unscrew the bolt from the oil sump, allowing the oil to …
How to Change Fuel Filter on Peugeot 106
How to Change Fuel Filter on Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Learn how to change the fuel filter on a Peugeot 106. Lift the car with a jack, then locate the position of the fuel filter. Disconnect the wires and…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos