Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing Engine Oil

Model: Peugeot 106 MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Engine oil

Video tutorial

To replace the engine oil, place the vehicle on suitable car ramps, position a container of appropriate capacity under the oil sump, aligned with the drain plug. Unscrew the plug to allow the oil to drain out and refit it at the end of the draining without exceeding the torque specification.

It is advisable to also replace the oil filter and to change it alternately with the oil change. Finally, fill the engine with new oil until the level is reached, using oil that meets the manufacturer's specifications.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Peugeot 106 (1991-2004 / MK 1) When changing the engine oil, it is advisable to also replace the filter due to the low cost and ease of installation. After draining the used oil th…
Oil Change on a Peugeot 106
Oil Change on a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Change the old oil on a Peugeot 106, including the filter. Lift the car on a column lift and unscrew the bolt from the oil sump, allowing the oil to …
Clutch Replacement Instructions
Clutch Replacement Instructions
Peugeot 106 (1991-2004 / MK 1) Replacing the clutch is not typically a DIY maintenance task, but if you have some tools and good mechanical knowledge, you can proceed. Lift the veh…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos