Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to reset the Peugeot 2008 tire warning light

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 2 - Years 2019-2024
Part: -board computer
Operation: How to reset the Peugeot 2008 tire warning light

In today's video we see how to reset the tire pressure warning light in the Peugeot 2008; this tutorial can also be useful for other similar models, such as the Peugeot 208. We enter the car and locate the right button on the instrument panel. Let's keep it pressed and at the same time turn the car key. The countdown will start and will last about ten seconds. After this the operation will be completed. We remind you to carry out this operation after checking the correct tire pressure and, if necessary, restoring the pressure correctly.


Posted on 18 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - How to reset the tire pressure warning light on Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - What to do if the Peugeot 2008 touch screen does not turn on? Read Answer
    • Peugeot 2008 2019-2026 - How to turn off the Service warning light on Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - What to do if the Peugeot 2008 screen does not work? Read Answer
    • Peugeot 2008 2019-2026 - What is the problem that Peugeot 2008 has with AdBlue? Read Answer
    • Peugeot 2008 2019-2026 - What to do if the touch screen does not work on Peugeot 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos