Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to reset the tire pressure warning light on the Peugeot 2008?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Tires
Operation: How to reset the tire pressure warning light on the Peugeot 2008?

Resetting the tire pressure warning light in the Peugeot 2008, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, make sure to restore the correct pressure to each tire following the instructions in the manual. Let's start by inserting the key and turning on the instrument panel. Then, on the touch-screen display, go to the main menu and enter the "Driving" section. Next, select "Under-inflation initialization", confirm the reset, and restart the vehicle to verify that the operation has been successful.


Posted on 1 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - Why does the tire pressure warning light come on in the Peugeot 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos