Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wing Mirror on a Peugeot 206?

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Side mirror

Video tutorial

In this tutorial, you will learn how to remove and then replace the external rear-view mirror on a Peugeot 206. Start by removing the internal plastic cover, then disconnect the adjustment motor connector and unscrew the 3 Torx screws. Go outside the car, grip the mirror, and pull it out of its housing.

Fitting the replacement is equally straightforward; simply follow the same procedure in reverse. It is advisable to connect the connector first and check the correct operation of the adjuster before proceeding with the rest of the installation.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Replace the External Rear-View Mirror on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Here are the main instructions for removing and replacing the external rear-view mirror on a Peugeot 206, in simple and quick steps. First, open the …
Guide to Replacing the External Wing Mirror on a Peugeot 206
Guide to Replacing the External Wing Mirror on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this brief guide, you will discover the main instructions on how to remove and replace the external wing mirror on a Peugeot 206. First, open the …
How to Replace the External Wing Mirror on a Peugeot 206?
How to Replace the External Wing Mirror on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the external wing mirror on a Peugeot 206, start by removing the triangular plastic cover located inside the door, corresponding to the mi…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos