Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 106
    4. : Anti-roll bar installation

Peugeot 106 - Video tutorial

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Anti roll bar
Operation: Anti-roll bar installation

To install the anti-roll bar it is necessary to lift the car on a lift in order to access the lower part of the car; the bar is fixed to the fixing pins of the oscillating arms of the suspension: it is therefore sufficient to unscrew the aforementioned pins, insert and align the anti-roll bar and tighten the pins again. In this way, a transverse connection is created between the car's suspensions, giving it greater torsional stiffness to the advantage of road holding but at the expense of driving comfort since the car will be more rigid.


Posted on 8 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos