Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing an Anti-Roll Bar

Model: Peugeot 106 MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Anti-roll bar

Video tutorial

All cars are already equipped with an anti-roll bar, a mechanical component that connects the suspension hubs of independent wheel type on the same axle to counteract roll, the phenomenon that occurs during rapid direction changes. Under such conditions, load transfer occurs towards the outer part of the vehicle, which tends to lean towards the outside of the curve (hence roll) due to centrifugal force.

To improve road holding and reduce roll, you could install stiffer springs and dampers, but this would compromise driving comfort. An excellent solution is to install an additional stabiliser bar, which connects the tops of the dampers.

The installation is extremely simple; just unscrew the fastening nuts of the damper supports, insert the bar's flanges, and re-screw them.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Installing the Anti-Roll Bar
Installing the Anti-Roll Bar
Peugeot 106 (1991-2004 / MK 1) .. To install the anti-roll bar, lift the vehicle on a hydraulic lift to access the underside; the bar is fixed to the mounting.. …
Why does the Peugeot 106 have a 'wobbly' rear end?
Why does the Peugeot 106 have a 'wobbly' rear end?
Peugeot 106 (1991-2004 / MK 1) The rear suspension of the Peugeot 106, especially in the earlier models, was famous for being "bouncy," which made it very popular among rally drive…
Stabiliser Link Replacement
Stabiliser Link Replacement
Peugeot 106 (1991-2004 / MK 1) The link is the connecting element between the shock absorber and the stabiliser bar: it is constantly subjected to numerous stresses, making the fai…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos