Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat of the Peugeot 607?

Model: Peugeot 607 MK 1 - Years 2000-2010
Part: Seat

To remove the front seat of the Peugeot 607, push the seat all the way back to access the bolts located at the front of the sliding rails. Once these are loosened, unscrew the bolts at the bottom of the seat and at the rear of the sliding rails. This will free the seat, allowing it to be removed from its housing by disconnecting the connectors underneath; at this point, you can insert the new seat, which must be securely fixed and connected.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Peugeot 607 located?
Where is the fuse box of the Peugeot 607 located?
Peugeot 607 (2000-2010 / MK 1) To locate the box containing all the various fuses of your Peugeot 607, you do not need to consult a professional. In fact, you just need to follow t…
How to Reset the Service Light in the Peugeot 607?
How to Reset the Service Light in the Peugeot 607?
Peugeot 607 (2000-2010 / MK 1) In this tutorial, see how to reset the service light in the Peugeot 607, a very simple and quick operation, to be done only after completing all sche…
How to Reset the Service on a Peugeot 607?
How to Reset the Service on a Peugeot 607?
Peugeot 607 (2000-2010 / MK 1) In this tutorial, you will see how to reset the service light on a Peugeot 607, a very simple and quick operation to perform only after completing al…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos