Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Disc on the Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Brake rotors

To replace the rear brake disc on the Peugeot 207, lift the car with a jack or ramp so that the corresponding wheel is off the ground. After lifting the vehicle, loosen the bolts securing the wheel, completely remove it, and access the components at the rear. Next, unscrew the bolts securing the brake caliper and then the bolts securing the disc. This will allow the disc to be removed and replaced with a new part; you can then reassemble all the removed components.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Door Panel of the Peugeot 207
How to Replace the Rear Door Panel of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will learn how to remove and replace the rear door panel to install the speaker on the Peugeot 207. First, open the rear …
How to replace the battery of the Peugeot 207 key
How to replace the battery of the Peugeot 207 key
Peugeot 207 (2006-2015 / MK 1) If you want to be able to replace the small battery inside the key of your Peugeot 207 by yourself, all you have to do is read the following guide an…
How to remove the rear bumper of the Peugeot 207
How to remove the rear bumper of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Today's steps will show us how to disassemble and replace the rear bumper of the Peugeot 207, following the instructions below. First of all, let's m…

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos