Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Wing Mirror Glass

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Side mirror

Video tutorial

If the glass of the external wing mirror breaks, it is not necessary to replace the entire unit; you can purchase just the glass, which can be installed without disassembling anything. A practical and cost-effective solution is to create a cardboard template of the original glass, have a new one cut by a glazier, and apply it over the broken glass using silicone.

However, if you decide to buy a new glass, simply detach the broken one from its housing using a screwdriver to pry it off, disconnect the connectors for the heating system, attach them to the new glass, and fit it into place.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to mount the mirror on the external rearview mirror of the Peugeot 206
How to mount the mirror on the external rearview mirror of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) When the mirror of the external rearview mirror of the Peugeot 206 is damaged by an impact, it must be replaced. To remove the mirror, simply insert …
Replacing Car Wing Mirror
Replacing Car Wing Mirror
Peugeot 206 (1998-2012 / MK 1) Replacing the external wing mirror of your car is a task that can be easily done yourself, knowing which model of mirror needs to be replaced. The re…
Removing the Interior Rear-View Mirror from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the interior rear-view mirror from the Peugeot 206 if it is damaged and irreparable. Here’s how to remove it from above the front windscreen. …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos