Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Ignition Cylinder in a Peugeot Partner Van?

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Checks and maintenance

This tutorial explains how to remove the ignition cylinder in a Peugeot Partner van, a very simple and quick task. First, insert the key but do not turn on the ignition. Next, remove the steering column cover by unscrewing all the relevant screws. Then, remove the immobiliser ring, disconnect the connector, and unscrew the bolt located on the lower side. At this point, locate the small pin positioned in the upper internal area of the cylinder, press it down with a screwdriver, and turn the key to the first position, thus unlocking the entire element.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot Partner Tepee (2008-2018 / B9) In this valuable video, we can find the entire electrical diagram of the Peugeot Partner Van, with indications of the wiring and a series of handwrit…
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial we can see how to reset the service in the Peugeot Partner van, an extremely simple and quick operation, to be carried out only once…
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, we can see how to reset the service in the Peugeot Partner van, an extremely simple and quick operation to be carried out only afte…

Other guides you may be interested in

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - Where is the Peugeot Partner jack located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos