Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Light Bulbs on a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Tail light bulb

To replace the rear light bulbs, you need to: open the boot and locate, near the affected light unit, a nut and unscrew it with pliers; this nut secures the light to the bodywork. Once the nut is removed, you can pull out the light unit (push it outward). Be careful to disconnect the power connector at the back. At this point, you need to unclip the lamp holder by spreading the retaining clips. Disconnect the power connectors located under the holder. Now you will have access to the individual bulbs and can replace them if necessary. Finally, reassemble all components in reverse order.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Headlamp Bulbs on Peugeot 207
Replacing the Rear Headlamp Bulbs on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replace the damaged bulbs inside the rear headlamp of your Peugeot 207. Open the boot and remove the side trim panel. Locate the screws securing the …
Removing the Rear Light of a Peugeot 207
Removing the Rear Light of a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Is the rear light damaged? Let’s see how to remove the rear light from a 207. Lift the boot lid, and using a socket spanner, undo the securing nuts l…
How to Replace the Rear Light on a Peugeot 207
How to Replace the Rear Light on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos