Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : Peugeot 207 rear lights replacement

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Rear light bulb
Operation: Peugeot 207 rear lights replacement

In this video tutorial we will see how to remove and replace the rear light bulbs of a Peugeot 207. First we open the trunk lid and we go to remove the plastic screw that holds our headlight: then we go to unclip the headlight from the side by disconnecting the electrical connector of the bulbs. At this point we release the tabs of the lamp holder and separate it from the ceiling light: then we access all the bulbs, where it will be enough to rotate them to extract them and then replace them. Once done let's go and put the lighthouse back in place.


Posted on 24 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos