Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs of the Rear Light of the Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light bulb

Video tutorial

Today, we will explain how to replace the bulbs of the rear light of the Peugeot 207. Open the boot and remove the side cover of the light. Disconnect the plug by rotating the screw and disengage the light from its housing.

Disconnect the connector and place the light on a work surface. Remove the cover of the light unit to replace the bulbs.

Perform the same operation for the removal of the left rear light. Insert the new bulbs into the lights and close the light units.

Position the light back in its housing and reconnect the connector. Refit the screw and close the internal cover.

After performing the same procedure on the left light, close the boot.


Posted on 7 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs of a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Let's see how to replace the front headlight bulbs of a Peugeot 207. Open the front bonnet by pulling the lever located at the bottom right of the da…
Replacing the Rear Lights on a Peugeot 207
Replacing the Rear Lights on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will learn how to remove and replace the bulbs in the rear light of a Peugeot 207. First, open the boot and remove the pl…
Replacing the Rear Headlamp Bulbs on Peugeot 207
Replacing the Rear Headlamp Bulbs on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replace the damaged bulbs inside the rear headlamp of your Peugeot 207. Open the boot and remove the side trim panel. Locate the screws securing the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos