Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gas Strut from the Parcel Shelf of a Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Body

Video tutorial

Learn how to repair the gas strut of the parcel shelf on a Peugeot 206. First, place a spacer to support the parcel shelf. Using an Allen key, turn three-quarters of a turn to the right of the boot to relieve pressure.

In the central mechanism, there is a small spring clip that you need to release, and push the piston back. Using a pair of pliers, remove the side spring and pull out the pin holding the mechanism.

At this point, you can pull out the piston; note the number of tubes or take a photo to remember their arrangement. Unscrew the washers and pull out the tubes.

You need to clamp the piston and pull it out with two screwdrivers. Replace it and then reassemble everything in reverse order.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

Removing the Door Panel on a 206
Removing the Door Panel on a 206
Peugeot 206 (1998-2012 / MK 1) How to remove the door panel to take out the speaker on a Peugeot 206? Here’s how to remove the cover panel. Remove the plastic at the corner of the …
How to Replace the Front Brake Pads on the Peugeot 206
How to Replace the Front Brake Pads on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In today's video tutorial, you will learn how to remove and replace the front brake pads on the Peugeot 206 in simple steps. First, lift the vehicle …
Changing Oil on Peugeot 206 1.1
Changing Oil on Peugeot 206 1.1
Peugeot 206 (1998-2012 / MK 1) Learn how to replace the engine oil on a Peugeot 206. Lift the bonnet to remove the oil filter. Raise the vehicle on a column lift or jack, unscrew t…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos