Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Front Brake Pads on a Peugeot 301

Model: Peugeot 301 MK 1 - Years 2012-2019
Part: Brake pads

To replace the front brake pads on a Peugeot 301, lift the car with a jack so that the corresponding wheel is off the ground. Once lifted, you will need to remove the bolts that secure the wheel to access the components behind it. Here, you can detach the brake caliper from its rotor by unscrewing the appropriate bolts: from the inside of the caliper, you can extract the pads, which should be replaced with new ones. After the replacement, reassemble all the components that were removed earlier.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb in a Peugeot 301
Peugeot 301 (2012-2019 / MK 1) Let's see in this short and simple guide how to remove and replace the headlight bulb in a Peugeot 301 by following the instructions below. First, op…
Where is the fuse box of the Peugeot 301 located?
Where is the fuse box of the Peugeot 301 located?
Peugeot 301 (2012-2019 / MK 1) The box containing all the various fuses for your Peugeot 301 is located inside the cabin. To be able to locate it and have easy access to the fuses,…
How to Remove the Front Seat from a Peugeot 301
How to Remove the Front Seat from a Peugeot 301
Peugeot 301 (2012-2019 / MK 1) To remove the front seat from a Peugeot 301, push the seat backward to access the bolts securing the front of the sliding rails. Once these bolts are…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos