Do it yourself
| ||||
|
Peugeot 3008 - Video tutorial
Model: Peugeot 3008
MK 2, P84
- Years 2016-2023 The guide shows how to top up the AdBlue in the Peugeot 3008. This operation does not require any special tools, but it is advisable to use protective gloves as the additive can be irritating; at the end of the operation it is recommended to wash your hands. The first operation to carry out is to identify the cap of the additive tank, located inside the fuel flap. Unscrew the cap and start topping up the fluid up to the quantity established by the manufacturer and which can be identified in the vehicle use and maintenance manual.
Posted on 7 May 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil warning light on the Alfa Romeo GiuliettaIf you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.012
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |