Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Peugeot 2008

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Service warning light

After performing the routine maintenance operations recommended by the manufacturer for the Peugeot 2008, you need to reset the dashboard lights that remind you to carry out this operation. While seated in the driver's seat, press and hold the button marked with a spanner/000, located in the centre of the console, and turn on the ignition. On the central display, you will see a countdown starting from ten seconds. Once this countdown is complete, turn off the ignition and release the button. Start the car and check that the operation has been successful.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on a Peugeot 2008
Resetting the service light on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) The video shows how to reset the service light on a Peugeot 2008. This is a very simple operation that does not require the help of a mechanic. Witho…
How to reset the "Service" light on a Peugeot 2008?
How to reset the "Service" light on a Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) Good morning, today the goal is to reset the "Service" light on our Peugeot 2008. Before performing this procedure, it will be necessary to have prop…
How to Reset the Service Light on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) How do you turn off the service light on a Peugeot 2008? Follow these steps to switch off the car's light. Turn on the instrument panel and check the…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos