Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Tyre Warning Light in a Peugeot 2008?

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part:

In this tutorial, you will learn how to remove the tyre warning light in a Peugeot 2008, a very simple operation to perform only after restoring the correct pressure in each tyre following, for example, a puncture. First, turn on the ignition, then enter the general menu by pressing the appropriate button located to the left of the display and select "Vehicle". Next, enter "Tyre Initialisation" and perform the recalibration by selecting "Yes". Return to the main screen and check that the procedure was successful.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 2008 (2019-2026 / MK 2) To reset the tyre pressure warning light on the Peugeot 2008, turn on the ignition to access the menu on the central display: press the button with t…
Peugeot 2008 (2013-2019 / MK 1) If you have noticed that the low tyre pressure warning light is illuminated on the dashboard, you need to check the tyre inflation pressures and, if …
Peugeot 2008 (2019-2026 / MK 2) From the instrument panel of the Peugeot 2008, you can clear the tyre pressure warning light by turning on the ignition, allowing access to the menu …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos