|
Do it yourself
| |||
| ||||
How to Reset the Tyre Pressure Light on the Peugeot 2008?
Model: Peugeot 2008
MK 1
- Years:
2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
In this tutorial, you will learn how to reset the tyre pressure light on the Peugeot 2008. This simple and quick operation should only be performed after restoring the correct pressure in each tyre, for example, after a puncture. First, insert the key and turn on the ignition. Then, access the general menu using the button on the left of the display and enter "Vehicle". Finally, select "Under-Inflation Detection" and confirm the reset. Restart the vehicle and check that the operation was successful.
Updated on 3 August 2026 by ScegliAuto
Related tutorials
Peugeot 2008
(2019-2026 /
MK 2)
To reset the tyre pressure warning light on the Peugeot 2008, turn on the ignition by rotating the key in the ignition switch. Once the ignition is o…
Peugeot 2008
(2019-2026 /
MK 2)
To reset the tyre pressure light on the Peugeot 2008, first inflate the tyres to the correct pressure value: this value is indicated on the sticker a…
Peugeot 2008
(2019-2026 /
MK 2)
From the instrument panel of the Peugeot 2008, you can clear the tyre pressure warning light by turning on the ignition, allowing access to the menu …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
What to Do If the Boot of the Opel Insignia Won't Open?
If the boot of your Opel Insignia won't open, for example due to a fault with the lock actuator or the corresponding control button, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the right rear door, then fully lower the backrest of the seat by operating the respective lever. Next, go inside the boot, locate the indicated gap, and using a screwdriver, manually unlock the lock. At this point, you can open the tailgate and repair the faulty component. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.065
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |