Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Service warning light

To permanently eliminate the service light that appears on the instrument cluster of your Peugeot 2008 first series (2013-2019), follow the steps below. First, get inside the vehicle and reach the driver's seat. Next, ensure the ignition is off and locate the button with a small spanner symbol. This button is located just below the display of the instrument cluster. Press and hold this button while turning on the ignition. Finally, wait ten seconds, and the procedure is complete.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 2008
How to Reset the Service Light on a Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) Below are the steps to reset the service light for routine maintenance on a Peugeot 2008. First, get in the vehicle and press and hold the button at …
How to Reset the Service Light on a 2022 Peugeot 2008
How to Reset the Service Light on a 2022 Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) To start updating the mileage for the next service on a 2022 Peugeot 2008, turn on the instrument panel and press the BC button located on the left s…
How to Reset the Service Light on a Peugeot 2008
How to Reset the Service Light on a Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) If you are wondering what steps are necessary to reset the service light on your Peugeot 2008 Mk2, just follow the instructions below carefully. Firs…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos