Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag in a Peugeot 307?

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Airbag

In this tutorial, see how to remove the airbag in a Peugeot 307, a very simple and quick operation. Before proceeding, disconnect the negative terminal of the battery to avoid accidental activation. Start by going inside the cabin, then locate the hole on the rear right side of the steering wheel, insert a screwdriver and unlock the internal clip. Repeat the operation on the opposite side, grasp the airbag and pull it out of the housing. At this point, simply disconnect the connector and proceed with fitting the replacement if necessary.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the airbag and steering wheel of a Peugeot 307
How to remove the airbag and steering wheel of a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this video, we can see how to remove the airbag and steering wheel from a Peugeot 307: on the back of the steering wheel there are two holes that …
Replacing the Horn Button on the Peugeot 307
Replacing the Horn Button on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) This guide shows how to remove and replace the horn button on the Peugeot 307 in simple and quick steps. First, open the bonnet and disconnect the ba…
How do you deactivate the passenger airbag of the Peugeot 307?
How do you deactivate the passenger airbag of the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) To deactivate the passenger airbag on board the Peugeot 307, you will need to insert the ignition key into the appropriate lock located on the centra…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos