Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Horn Button on the Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009

This guide shows how to remove and replace the horn button on the Peugeot 307 in simple and quick steps. First, open the bonnet and disconnect the battery; then get inside the vehicle and push on the rear holes to remove the airbag from the steering wheel, disconnecting its electrical connector as shown in the video. At this point, replace and install the new airbag, securing it properly and connecting it; reconnect the two battery terminals, thus completing the task!

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Horn Button Connector on Peugeot 307
Removing the Horn Button Connector on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this video tutorial, follow the instructions to remove the connector for the horn buttons on the steering wheel of a Peugeot 307. The issue of the…
How to Remove and Replace the Horn on the Peugeot 307
How to Remove and Replace the Horn on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Follow these step-by-step instructions to remove and replace the horn or sounder on the Peugeot 307. First, open the bonnet of the vehicle and begin …
How to Replace the Window Switch Button of the Peugeot 307
How to Replace the Window Switch Button of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) You can replace the window switch button of the Peugeot 307 by loosening the screw located directly behind the switch panel: once the screw is loosen…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos