Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : Replacement of the cabin air filter of the Peugeot 2008.

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 2 - Years 2019-2024
Part: Cabin air filter
Operation: Replacement of the cabin air filter of the Peugeot 2008.

To prevent dust and foreign objects from entering the ventilation system of the Peugeot 2008, the manufacturer has included a specific filter. This filter needs to be replaced periodically to maintain its efficiency. To do this, position yourself in the passenger seat and remove the panel of the central tunnel located under the dashboard. Release the three snap fasteners that secure the covering under the glove compartment. This will allow access to the cover of the filter box located on the side of the central tunnel. Open the cover and remove the two sections of the filter element. Replace them with two new ones, making sure to orient them correctly, and close the cover. Put the covering back in place with its pins and reattach the tunnel panel.


Posted on 26 July 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - Where is the cabin air filter located in the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where is the pollen filter located on Peugeot 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos