Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot 3008?

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Service warning light

To reset the Service light on a Peugeot 3008, press and hold the button located in the centre right of the instrument panel while it is off. Continue holding the button and insert the key into the ignition. You will notice a countdown starting from ten on the instrument panel. Keep holding the button until the countdown ends; then release the button, ensuring that the Service light has completely disappeared from the instrument panel.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Peugeot 3008?
How do you reset the Service light on the Peugeot 3008?
Peugeot 3008 (2009-2016 / T84, MK 1) The service indicator of the Peugeot 3008 can be reset by holding down the button located on the right side of the instrument panel, with the icon of…
How to reset the "Service" indicator on a Peugeot 3008?
How to reset the "Service" indicator on a Peugeot 3008?
Peugeot 3008 (2016-2023 / MK 2, P84) To reset the "Service" light on a Peugeot 3008, start by turning on the instrument panel without starting the engine. Use the buttons on the steering…
How do you reset the AdBlue light on the Peugeot 3008?
How do you reset the AdBlue light on the Peugeot 3008?
Peugeot 3008 (2016-2023 / MK 2, P84) In order to reset the AdBlue light of the Peugeot 3008, you need to go and top up with the necessary amount of additional fluid: this must be inserte…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos