Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Remote Control for the Peugeot 407 or Others (Including Citroen)

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Key

Video tutorial

To replace the battery in the remote control of the Peugeot 407 or others (some also Citroen), start by inserting a small flat screwdriver into the slot at the bottom of the remote and lever to separate the two halves (a coin was used in the video); once the two halves are separated, remove the circuit board from one half and place it in the other half the opposite way, using a small flat screwdriver, lever from the bottom to remove the battery (a knife was used in the video), take the new battery, insert it into its slot in the same orientation as the old one; now take the half with the battery, position it on the half with the circuit board and press to snap them together.

Finally, check the correct functioning of the new battery.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Peugeot 407
How to Replace the Key Battery on a Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Replacing the remote key battery on a Peugeot 407 is a very simple task that can be done independently in just a few minutes. To replace the battery,…
How to Reprogram the Key of a Peugeot 407
How to Reprogram the Key of a Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Reprogramming the key/remote of a Peugeot 407 after replacing the battery due to a fault is a very simple task to do independently, aided by our shor…
Replacing the Gear Knob on Peugeot 407, 307, 207, 3008
Replacing the Gear Knob on Peugeot 407, 307, 207, 3008
Peugeot 407 (2004-2012 / MK 1) In this video tutorial, you will learn how to replace the gear knob on a Peugeot 407, as well as on many other models from the Peugeot and Citroen gr…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos