Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 607
  6. : What is the fuse layout of the Peugeot 607?

Peugeot 607 - Video tutorial

Model: Peugeot 607 MK 1 - Years 2000-2010
Part: Fuse box
Operation: What is the fuse layout of the Peugeot 607?

If some of the devices in the Peugeot 607 have suddenly stopped working, the first thing we can do is check the status of their respective fuses, the diagrams of which are indicated in this video. As shown, we find the first box inside the passenger compartment, behind the small door located in the lower area of the dashboard, on the driver's side. The second box is instead positioned inside the engine compartment, protected by the plastic cover also located on the driver's side. Make sure to replace the faulty fuses with replacements of the same specifications and operate with the vehicle turned off.


Posted on 24 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos