Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Fuel filter

In this tutorial, you will learn how to replace the fuel filter on a Peugeot 206, a very simple and quick operation. First, lift the right rear side of the vehicle, taking all necessary safety precautions. Then, go underneath and locate the filter positioned just to the right of the fuel tank. Disconnect both fuel pipes by unlocking the respective clips, then extract the filter by pushing it firmly towards the inside of the vehicle. Finally, follow the reverse procedure to fit the new part.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter of the Peugeot 206?
How to Replace the Fuel Filter of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the fuel filter of the Peugeot 206, access the underside of the vehicle near the left rear wheel: here you will find the fuel filter close…
How to Remove the Diesel Filter on a Peugeot 206 2.0 HDI
How to Remove the Diesel Filter on a Peugeot 206 2.0 HDI
Peugeot 206 (1998-2012 / MK 1) Today's instructions will show you how to remove and replace the diesel filter on a Peugeot 206 2.0 HDI in simple steps. First, open the bonnet of th…
How to Replace the Fuel Filter in a Peugeot 206?
How to Replace the Fuel Filter in a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In this tutorial, you will learn how to replace the fuel filter in a Peugeot 206, a very simple and quick task. First, open the fuel tank cap to rele…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos