Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Battery of the Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

This video shows the simple and quick procedure to replace the key battery of the Peugeot 208. The battery is a CR2032. To replace the key battery, use a flathead screwdriver to pry from the bottom of the key, on the side with the Peugeot logo. After slightly lifting the bottom part, use your fingers to remove the cover.

Once the cover is removed, you will have access to the key battery, which can be taken out for replacement. After replacing it, close the key by pressing it together with your fingers.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to change the battery of the remote control for the Peugeot 208 2012.
How to change the battery of the remote control for the Peugeot 208 2012.
Peugeot 208 (2012-2019 / MK 1, A9) If you own a first edition Peugeot 208 (year 2012) and want to learn how to replace the battery located inside the car key remote, then all you have …
How to Change the Battery in the Peugeot 208 Key
How to Change the Battery in the Peugeot 208 Key
Peugeot 208 (2012-2019 / MK 1, A9) Replacing the battery in the remote key for this car model is quite simple as you do not need to separate the shells that comprise it, nor extract th…
How to Dismantle and Change the Key Battery of the Peugeot 208
How to Dismantle and Change the Key Battery of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) To dismantle the key of the Peugeot 208 and change the battery, first, remove the small cover with the Peugeot emblem using a small flathead screwdri…

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos