Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Connect an AUX-IN Cable to the Peugeot 206 Radio

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Car stereo

In this video, see how to install the AUX-IN adapter on the radio of a Peugeot 206: first, remove the upper trim where the clock is located. To do this, unscrew the two Torx screws on the sides, then gently pry it off and disconnect the electrical connector. In the same way, by prying all around the frame, you can easily remove the entire radio fascia. The AUX-IN plug should be inserted behind the radio, at the top, as shown in the video. Insert the device inside and route the cable into the front glove compartment.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Peugeot 206
How to Remove the Radio from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Want to remove the radio from a Peugeot 206? Use original or aftermarket metal keys to detach the car radio. Insert the keys into the slots (located …
How to Remove the Radio from the Peugeot 206
How to Remove the Radio from the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) If you want to remove the standard radio from your Peugeot 206 but don't know how, follow these steps carefully. First, enter the vehicle and ensure …
Removing the Clutch Cable of the Peugeot 206 1.4
Removing the Clutch Cable of the Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) Below are the instructions that will allow you to remove and replace the clutch cable of the Peugeot 206 1.4. First, open the vehicle's bonnet and be…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos