Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper of the Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Rear bumper

See other generations:
Video tutorial

Follow these instructions to remove and replace the rear bumper of the Peugeot 208 in simple steps. First, open the boot and start unscrewing the fixing screws located at the top of the bumper and those for the rear lights, removing the latter; then unscrew the screws found on both sides of the rear wheel arches, as shown in the video.

At this point, gently detach the bumper from the sides until it is completely removed, then replace it with the new one; refit the bumper and the rear lights!


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper from a Peugeot 208?
How to Remove the Rear Bumper from a Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To remove the rear bumper from a Peugeot 208, loosen the screws that secure the part to its housing: these screws will be located inside the wheel ar…
How to Remove the Rear Bumper from the Peugeot 208
How to Remove the Rear Bumper from the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Today's instructions will show you how to remove and replace the rear bumper on the Peugeot 208, following these simple steps. First, open the boot a…
How to remove the front bumper of the Peugeot 208
How to remove the front bumper of the Peugeot 208
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) Today we will illustrate the steps to remove the front bumper of the Peugeot 208. We start by unscrewing all the lower screws and then the upper ones…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos