Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery of a Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Battery

Video tutorial

If the battery of your Peugeot is flat and does not support subsequent charging attempts, it needs to be replaced. To do this, open the bonnet and locate the battery on the right.

Open the top cover of the battery by pressing the buttons, then disconnect the positive terminal clamp and secure it away from the battery. Using a 10 mm spanner, also undo the positive terminal, remove the battery cover, and with a 13 mm socket and extension, unscrew the retaining bracket and remove the old battery.

Clean the inside of the terminals with sandpaper, place the new battery in position, secure it with its bracket, replace the cover, connect the positive terminal, and tighten it. Connect the negative terminal, tighten the screw, and close the cover.


Updated on 13 September 2026 by ScegliAuto


Related tutorials

Replacing the Battery of the Peugeot 206
Replacing the Battery of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) If the battery of the Peugeot 206 is flat and does not hold charge after subsequent attempts, proceed with the replacement. Open the bonnet, remove t…
How to replace the battery of the Peugeot 206
How to replace the battery of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) If you want to replace the battery of your Peugeot 206 on your own, just follow the steps described in the following guide and apply them step by ste…
How to replace the battery of the Peugeot 206
How to replace the battery of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the battery inside the engine compartment of your Peugeot 206 by yourself, you must follow the procedure described in our new mini guide. …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos