Do it yourself
| ||||
|
Peugeot 208 - Video tutorial
Model: Peugeot 208
MK 1, A9
- Years 2012-2019 If the remote control of our Peugeot 208 is no longer recognized, it is very likely that the battery is completely discharged and therefore needs to be replaced. This is an extremely simple and quick operation, let's see how to proceed in this tutorial. First of all, we extend the emergency metal key by pressing the appropriate button, then, using a small screwdriver with a flat tip, we lever in the indicated slot and remove the rear cover. We then remove the old battery, insert a replacement CR2032 type battery, and reassemble everything.
Posted on 15 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the Jeep Renegade Passive Entry lightThe guide shows how to reset the Passive Entry system, stylized by a key shaped light with three lines of WiFi is shown next to the mileage. This system allows the vehicle to be switched on without having to use the supplied keys. The reset must be performed keeping the keys inside the vehicle. In fact, with the instrument panel off, it will be necessary to press the ignition button located on the keys and then the brake pedal. At this point it is necessary to press the power button on the dashboard. At this point, wait five minutes before starting the vehicle normally. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |