Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Headlight bulb

Since we noticed that the dipped beam headlight bulb of the Peugeot 308 has blown, we must replace it as soon as possible. We open the engine hood and position ourselves in front of the headlight that contains the bulb to be replaced, inside we will find a rubber protection that we will remove, disconnect the electrical connector and release the metal clips that secure the bulb so that we can remove it. We insert the new H7 bulb into its slots, secure it with the metal clips, connect the electrical connector and put the rubber protection back in place.

Posted on 25 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Peugeot 308
How to replace the front headlight bulb of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Replacing the left front headlight bulb of the Peugeot 308 is a simple and quick operation, which can be done independently thanks to our video tutor…
How to replace the front headlight bulb of the Peugeot 308
How to replace the front headlight bulb of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Today's steps will show us how to disassemble and replace the low beam bulb of the front headlight of the Peugeot 308. First, we open the hood of the…
How to Replace the Rear Light Bulb on a Peugeot 308
How to Replace the Rear Light Bulb on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) To replace the rear light bulb on a Peugeot 308, open the tailgate and detach the carpet covering the rear light area. Under this carpet, you will fi…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos