Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Door Panel on a Peugeot Partner 2?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car door

See other generations:
Video tutorial

This video explains how to typically remove the inner trim panel of a door, generally applicable to all vehicles, not just the Peugeot Partner 2, as the method is standard. Start by removing the trim around the exterior mirror, then proceed to detach the internal handle, the electric window switches, and the latch for the door itself, finishing with any rear screws in internal points or by removing the perimeter clips.

For those interested, the video also covers the removal of the exterior mirror and the external handle.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Peugeot Partner
How to Remove the Door Panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before you start, open the front door of your Peugeot Partner. Begin by disengaging and removing the main insert of the door panel, using a thin but …
How to remove the door panel of a Peugeot Partner
How to remove the door panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before starting, open the door of your Peugeot Partner. Begin by prising out and removing the insert of the internal handle using a thin but sturdy t…
Removing the Front Door Panel of the Peugeot Partner Tepee
Removing the Front Door Panel of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) These instructions will allow you to remove and replace the front door panel of the Peugeot Partner Tepee. First, open the front door and start by re…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos