Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light on the Peugeot Partner?

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Service warning light

The Service indicator that appears on the instrument panel of the Peugeot Partner can be reset by holding down the reset button, which is located on the left side of the instrument panel next to the speedometer: you will need to hold down this button while the instrument panel is turned off. Continuing to hold down the button, you can insert the ignition key into the appropriate slot, turning it and noting that a countdown will appear: you must continue to hold down the button until the countdown is complete. At this point, you can release the button and turn off the instrument panel permanently.

Posted on 17 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Peugeot Partner Tepee (2008-2018 / B9) On the instrument panel of the Peugeot Partner, the Service light that is displayed can be reset by holding down the button located on the right side…
Peugeot Partner Tepee (2008-2018 / B9) If you have a 2014 Peugeot Partner and are wondering how to perform the manual reset procedure for the service light, then all you need to do is foll…
Peugeot Partner Tepee (2008-2018 / B9) To reset the Service light on the Peugeot Partner, you will need to hold down the button on the right side of the instrument panel while it is turned…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos