Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Transmission Oil in the Piaggio Vespa GTS 300?

Model: Piaggio Vespa Gts 300
Part: Transmission fluid

Video tutorial

In this tutorial, see how to change the transmission oil in the Piaggio Vespa GTS 300, a very simple and quick operation. First, wait until the engine is cool enough, then position a container under the transmission casing, locate both the drain bolt and the fill bolt, and unscrew them with a Torx key. Allow all the oil in the system to drain out, tighten the lower bolt, add the necessary amount of oil using a syringe, and tighten the upper bolt.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

Changing the Gear Oil on a Piaggio Vespa GTS 300
Changing the Gear Oil on a Piaggio Vespa GTS 300
Vespa Gts 300 In this video tutorial, you will see how to replace the transmission oil on a Piaggio Vespa GTS 300, following the instructions below. First, positio…
How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300
How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300
Vespa Gts 300 This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the …
How to Change the Engine Oil on a Piaggio Vespa GTS 300?
How to Change the Engine Oil on a Piaggio Vespa GTS 300?
Vespa Gts 300 In this tutorial, learn how to change the engine oil on a Piaggio Vespa GTS 300, a very simple operation to perform annually. First, ensure the engin…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos