Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Mp3 250
Part: Battery

In this video we see how to recharge the sealed battery of a Piaggio MP3: this type of batteries are normally sold with their charging pack. As we can see, all we have to do is remove the seal from the battery and the electrolyte pack and place it on the battery itself so that it can perform its charging function. Once the electrolyte has transferred to the battery cells, we put the cap back on, sealing the device again. After that, it is necessary to properly soak the plates, waiting a couple of hours. After that, it will be useful to do what is commonly called an "activation charge" using a booster; at this point, the battery can be installed on the vehicle.

Posted on 7 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on the Piaggio MP3 250?
How to Replace the Battery on the Piaggio MP3 250?
Mp3 250 To replace the battery on the Piaggio MP3, open the under-seat compartment by turning the lock with the appropriate key to access the components insi…
How to open the seat of a Piaggio MP3 without a battery
How to open the seat of a Piaggio MP3 without a battery
Mp3 250 In this video, we see how it is possible to open the seat of the Piaggio MP3 (125/250 but also higher displacements) even with a dead battery. It wil…
How to Replace the Transmission on a Piaggio MP3 250?
How to Replace the Transmission on a Piaggio MP3 250?
Mp3 250 To replace the transmission on the Piaggio MP3, loosen the bolts securing the protective cover located on the left side of the scooter, just below th…

How to Replace the Spark Plug on the Sym CruiSym 300

In this short and simple guide, you will learn how to remove and replace the engine spark plug on the Sym CruiSym 300, following the instructions below. First, place your scooter on the centre stand and begin by removing the under-seat compartment to access the upper part of the engine. Then, disconnect the spark plug connector, using a socket wrench with an extension to unscrew and remove it, as shown in the video. At this point, install the new spark plug of the correct type and thread pitch, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos