Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you install the kickstand on the Piaggio Ciao?

Model: Piaggio Ciao
Part:

Video tutorial

In order to install the stand on the Piaggio Ciao, you will need to position the central pin of the stand with the corresponding springs inside the respective housing on the bottom: once the pin and springs have been inserted, it will be possible to connect the stand to this pin and then insert the corresponding nuts in the two side parts of the stand itself.

At this point, it will be possible to screw these two nuts in so that the stand remains locked inside its housing and subsequently verifying that it functions correctly.


Posted on 5 September 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Luggage Rack from a Piaggio Ciao
How to Remove the Rear Luggage Rack from a Piaggio Ciao
Ciao Before starting, position your Piaggio Ciao on the centre stand. Begin by undoing and removing the bolts that secure the rear luggage rack to the Cia…
How to disassemble the air filter of the Piaggio Ciao
How to disassemble the air filter of the Piaggio Ciao
Ciao In this guide, we will see the instructions that will allow us to disassemble and replace the air filter of the carburetor of the Piaggio Ciao. First…
How to Dismantle and Clean the Carburettor of the Piaggio Ciao
How to Dismantle and Clean the Carburettor of the Piaggio Ciao
Ciao This guide briefly outlines the instructions for dismantling and cleaning the carburettor of the Piaggio Ciao, as well as the Si and Garelli. First, …

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos