Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to reset the Service light on the Piaggio Medley 125, you will need to press and hold the MODE button located at the bottom right of the instrument panel: continue holding it down and insert the ignition key into the ignition switch and turn it to turn on the instrument panel. In this way, you will notice that the wrench light will start flashing: you can now release the button after the light has disappeared from the instrument panel. You can complete the operation by turning off and then turning on the instrument panel again to verify the reset.

Posted on 16 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Piaggio Medley 125 Scooter?
How to Reset the Service Light on a Piaggio Medley 125 Scooter?
Medley 125 In this tutorial, see how to reset the service light on a Piaggio Medley 125 scooter, an extremely simple and quick operation, to be done only after …
How to reset the service light on the Piaggio Medley 125
How to reset the service light on the Piaggio Medley 125
Medley 125 In the following article, you will find the procedure to reset the service light of the Piaggio Medley 125. It is recommended to perform the followin…
How to reset the service on the Piaggio Medley 125 scooter?
How to reset the service on the Piaggio Medley 125 scooter?
Medley 125 In this tutorial we can see how to reset the service on the Piaggio Medley 125 scooter, an extremely simple and fast operation, to be carried out onl…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos