|
Do it yourself
| |||
| ||||
Model: Piaggio Si
To replace the clutch on a Piaggio Si, loosen the screws securing the transmission casing: this is located near the rear wheel, on its left side. Once the casing is removed, proceed to loosen the screws that secure the bell to its housing: then remove all the clutch discs from their seat to insert the new ones. These can now be secured with the screws, reposition the belt, and check that everything functions correctly.
Posted on 30 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Si
In this video, you will see how to remove the clutch bell and clutch on a Piaggio Si 50cc in simple and quick steps. First, place your vehicle on the…
Si
In this video, you will see how to adjust the points or contact points on various Piaggio models, such as the Si, Bravo, and Ciao. First, remove the …
Si
This guide shows you how to remove and replace the carburettor on the Piaggio Si, as well as on the Ciao, Bravo, and Garelli. First, place the motorc…
|
How to Check the Coolant Level in a Yamaha Xmax
In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.064
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
