|
Do it yourself
| |||
| ||||
Model: Piaggio Si
Today's guide will show you the steps to remove and replace the front wheel or tyre of the Piaggio Si, as well as the Ciao, Bravo, and Garelli. First, place the central stand; lift the wheel off the ground and use an 11 mm spanner to loosen the brake adjuster and remove the wiring. Next, use a 17 mm socket with an extension to unscrew the central wheel nut to remove it; if necessary, replace the tyre with a new one and reassemble everything!
Updated on 11 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Si
.. Piaggio Si, as well as on the Ciao, Bravo, and Garelli. First, place the motorcycle on its centre stand and begin by removing the side cover of the.. …
Si
Today's guide shows how to remove and replace the rear wheel and its hub on the Piaggio Si, following the instructions below. First, unscrew the fast…
Si
In this video, you will see how to remove the clutch bell and clutch on a Piaggio Si 50cc in simple and quick steps. First, place your vehicle on the…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
