Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Wheel and Hub of the Piaggio Si

Model: Piaggio Si
Part: Wheel

Video tutorial

Today's guide shows how to remove and replace the rear wheel and its hub on the Piaggio Si, following the instructions below. First, unscrew the fastening bolts of the rear wheel, disconnecting the wheel hub. Then, slide off the wheel and subsequently remove the hub by taking off the chain sprocket, as illustrated in the video.

At this point, inspect or replace the wheel hub or chain sprocket if necessary, and finally refit the rear wheel by applying the reverse procedure of the wheel removal!


Updated on 21 August 2026 by ScegliAuto


Related tutorials

Si Today's guide will show you the steps to remove and replace the front wheel or tyre of the Piaggio Si, as well as the Ciao, Bravo, and Garelli. First…
Si In this video, you will see how to remove the clutch bell and clutch on a Piaggio Si 50cc in simple and quick steps. First, place your vehicle on the…
Si To replace the clutch on a Piaggio Si, loosen the screws securing the transmission casing: this is located near the rear wheel, on its left side. Onc…

How to Change the Engine Oil of the Triumph Trophy 900

To change the engine oil of the Triumph Trophy 900, first, remove the drain plug located at the central lower part of the bike. Once the plug is loosened, collect all the used oil in a suitably positioned container. Next to the drain plug, you will also find the oil filter, which needs to be removed and replaced with a new part. After completing these steps, top up the oil through the breather located on the left side of the bike.

Watch the video!


by ScegliAuto

More videos